Cartridges for Air Filtration

At TDC, we know air filtration. We have built over 7 million cartridges filters over the past 25 years. You'll find our products in thousands of applications including electric generation, metal fabrication, powder processing, metal finishing, food processing, and more. Our specialty is tailoring the right product for your application.


TDC Filter manufacturers our cartridges in the USA. Our filters are a direct replacement for Donaldson, Farr, Torit, Wheelabrator, BACT, American Air filter, Pneuumafil, Scientific Dust Collector, UAS, Dust Hog and others.

We carry all design including round top and bottom, round flange top and bottom, square top, and we can supply them with galvanized or stainless steel. Select from an open or closed bottom. You can choose your outer construction: expanded metal, tomato cage or bands.

  Cylindrical Filter Cartridge
The cylindrical is the most common type of cartridge filter with many OEMs. We can make any length you need up to 60". Our diameters range from 6.8" to 22.5". We'll help you select the media that is correct for your application.
  Hook Filter Cartridge
HIS style filter can also be made with plastic end caps. you can choose from any diameter from 5.38" to 9.65" and any length up to 60". the common OEMs are Mix and Altair SLR.
  Lip Flange Cartridge
The pip flange filter style can be made in diameters from 18.875" to 14.25" and in any length up to 60". Common OEMs are BCO, Wheelabrator and USF/Surface prep. This style filter can be made with any of our full complement of media.
  Screw Top Cartridge
The three most common OEMs are Mahle, Tamrock, and Neuman & Esser. We can make any diameter from 4.25" to 6.30" and nay length up to 60". Our full selection of media will provide you the best solution.
  Shake Filter with Prefilter
As a replacement to Donaldson's Vibra Shake Units with prefilters, you can be assured our quality will meet or exceed the OEMs. The diameter is 16.5" with lengths including 10", 20" and 26"
  Square Flange Filter
The square flange cartridge can be found in OEMs such as Farr, Semco Bulk Transfer, Wheelabrator, and United Air Specialist. We can produce multiple diameters and any length up to 60". Our experts will help you choose the best media for your situation.
  Twist Lock Filter
This is a direct replacement for a pneumatic filter. We can provide all three lengths - 24", 29" and 34". We can also make the filter in the media that will be most suitable for your application.
  Oil Mist Filter
These oil mist filters come in diameters that range from 11.08" to 22.5". The lengths range from 8" to 25". If your application has oil and particulate in the gas stream , than this is the filter for you.
© Copyright Caribe Gasket & Supply, 2009. All Rights Reserved